Nissin

Nissin Commander Air 1 + Receiver Air R Canon

Code: NFG014C/AP

Nissin Commander Air 1 + Receiver Air R Canon


  • Nissin Air 2.4 GHz Radio TTL System
  • Compatible with Canon E-TTL / E-TTL II
  • Wireless Master TTL Functionality
  • Triggering Range: 98'
  • Eight Channels & Three Groups (A, B, C)
  • Flash Sync Speed up to 1/8000 Second
  • Manual Zoom Adjustment from 24-200mm
  • Manual Power Adjustment from 1/1-1/128
  • Color LED Control Panel & AF Assist Beam
  • Runs on 2 AAA Batteries


  • Nissin Air 2.4 GHz Radio TTL System
  • For Use with Air 1 Commander
  • Compatible with Canon E-TTL / E-TTL II
  • Wireless Slave TTL Functionality
  • Triggering Range: 98'
  • Eight Channels & Three Groups (A, B, C)
  • Flash Sync Speed up to 1/8000 Second
  • Hot Shoe & PC Sync Terminal
  • Foot with 1/4"-20 Thread; Flip-Out Stand
  • Runs on 2 AAA Batteries

£0.00 £129.00
Earn 0 reward points


Free yourself from cables and the line-of-sight demanding optical slave modes with the Nissin Air 1 Commander, featuring the Nissin Air System with 2.4 GHz radio transmission for wireless master TTL control over NAS-compatible flash units. This unit is compatible with Canon cameras that utilize E-TTL / E-TTL II metering and offers a triggering range of up to 98'. Also, it features eight channels and three groups for setting up numerous flashes with different settings and modes all from the commander unit.

High-speed sync is supported with a maximum sync speed of 1/8000 second along with compatibility for slow, 1st & 2nd curtain sync modes. The zoom setting of the flash can also be manually adjusted from 24-200mm along with the power from 1/1 to 1/128. The Air 1 features a color LED control panel to view settings and make adjustments as well as an AF assist beam for focusing in low light conditions. Additionally, it runs on 2 AAA batteries.

Capable of firing flash at a rate of 10 flashes per second
Battery life of about 3000 flahses
Exposure compensation support from -2 to +2 EV in 1/2 EV steps
AF assist light has range of 2.3-19.7'


Bring all of your Canon TTL flashes into the Nissin Air System with 2.4 GHz radio transmission by mounting them to the Air R Receiver. Using an Air 1 Commander for the Canon E-TTL / E-TTL II system and the Air R Receiver, photographers can now set up and control numerous flashes in an off-camera setup at distances up to 98'. The receivers add wireless slave TTL functionality with support for high-speed sync up to 1/8000 second, manual power control, and manual zoom, with the ability to select between 8 channels and organize 3 groups.

Connecting to a TTL flash is simple as the receiver has a hot shoe on the top for communication. For strobes and manual flashes, the Air R also has a PC sync terminal for basic connections. Mounting the receiver is simple as well with a cold foot on the bottom with a 1/4"-20 thread for stands. There is also a flip-out stand for placing directly on a flat surface. Additionally, it runs on 2 AAA batteries.

MountShoe
Frequency2.4 GHz ISM band radio transmission
Exposure ControlManual/TTL
Vari-Power1/1 - 1/128
TTL DedicationYes
Zoom RangeFull frame: 24-200mm
Flash Interval10 flashes per sec
Maximum Flash Synchronization Speed1/8000 sec
Flash Ready IndicatorYes
Compensation-2 EV to +2 EV (in 1/2 EV steps)
Wireless TransmissionMethod: RF
Distance: Up to 98' / 30 m
Wireless Communication Channels8 Channels
Wireless Groups3 Groups
Power Source2 x AAA batteries
Dimensions2.6 x 2.4 x 2.2" / 65 x 60 x 55 mm
Weight1.9 oz / 55 g without batteries
Packaging Info
Package Weight0.15 lb
Box Dimensions (LxWxH)3.4 x 2.7 x 1.6"


Frequency2.4 GHz ISM band radio transmission
Exposure ControlManual/TTL
Vari-Power1/1 - 1/128
TTL DedicationYes
Zoom RangeFull frame: 24-200mm
Flash Interval10 flashes per sec
Maximum Flash Synchronization Speed1/8000 sec
Flash Ready IndicatorYes
Compensation-2 EV to +2 EV (in 1/2 EV steps)
Wireless TransmissionMethod: RF
Distance: Up to 98' / 30 m
Wireless Communication Channels8 channels
Wireless Groups3 groups
External Flash ConnectionHot shoe
PC sync terminal
MountCold foot
1/4"-20 thread
Power Source2 x AAA batteries
Dimensions2.6 x 2.4 x 2.0" / 65 x 60 x 50 mm
Weight1.9 oz / 55 g without batteries
Packaging Info
Package Weight0.2 lb
Box Dimensions (LxWxH)3.6 x 2.6 x 1.7"

The item has been added to your basket

Continue Shopping
Proceed To Checkout