Fujifilm

FUJIFILM EF-X20 TTL Flash

Code: FAX1252

FUJIFILM EF-X20 TTL Flash

*Please contact for availability.

  • Compact and lightweight, yet offers a strong light intensity of guide number 20.
  • With the FUJIFILM's unique flash control technology "i Flash technology", it can automatically optimize the amount of light suitable to every shooting condition.
  • Crafted from premium metal materials to compliment the design of the X-Series cameras.
  • Ergonomic design for responsive dial control.
  • Built-in wide diffuser can be selected by using lever on the side of the flash.
  • Built-in "Slave Mode" for advanced photography.





£0.00 £166.00
Earn 0 reward points


The EX-X20 enables flash compensation from -1EV to +1EV in increments of 1/3 stops in the TTL auto mode. It features a mechanism that automatically locks the shoe-mount flash unit when it is placed on the hot shoe. The mechanism firmly fixes the flash unit in place without operating the locking bar or tightening the screw, just easy attachment. To use the unit as a master flash, set the switch to X. To use the unit as a slave flash, set the switch to N-mode if the master flash is the "non-preflash" type and P-MODE if the master flash is the "preflash" type. The unit fires automatically upon detecting light from the master flash.


Exposure setting dial


Enables flash compensation from -1EV to +1EV in increments of 1/3 stops in the TTL Auto mode.
Enables flash output levels of 1/1, 1/2, 1/4, 1/8, 1/16, 1/32 and 1/64 in the Manual mode.
Immediate visual confirmation of settings even when the unit is turned OFF.

Image title

Lever for setting wide panel

Raise the lever to support a focal length of down to 20mm (35mm film equivalent). *

  • *The guide number becomes 12.




Image title

Mounting lock releasing button

Featuring a new mechanism that automatically locks the shoe-mount flash unit when it is placed on the hot shoe.
The mechanism firmly fixes the flash unit in place without operating the locking bar or tightening the screw, just easy attachment.

Image title

Wireless slave flash selector


To use the unit as a master flash, set the switch to X.
To use the unit as a slave flash, set the switch to N-MODE if the master flash is the "non-preflash" type, and P-MODE if the master flash is the "preflash" type.
The unit fires automatically upon detecting light from the master flash.

Image title







Model NameEF-X20
Guide Number(ISO100,m)20(12 when Wide panel is used)
Color temperatureApproximately 5600K at full power
Effective TTL flash range
Manual flash output1/1, 1/2, 1/4, 1/8, 1/16, 1/32, or 1/64
Exposure compensation+1 to -1 in increments of 1/3 EV
Slave modeAvailable (per-flash and non-pre-flash control supported)
Power sourceTwo AAA alkaline or Ni-MH batteries
Operating temperature0°C to 40°C (32°F to 104°F)
Dimensions(H x W x D)36.0 x 59.5 x 50.0mm(1.4 x 2.3 x 1.9in)
WeightApproximately 100g(3.5 oz), excluding batteries
Number of uses/Recycling time


 Number of uses **Recycling time ***
AAA alkaline batteries x 2Approx.60Approx.6s
AAA Ni-MH batteries x 2Approx.90Approx.5s
  • ** Battery endurance measured using fresh batteries manufactured within the previous three months.The number of uses is the number of times the flash can be fired at intervals of 30 seconds; the count ends when the TEST button (READY lamp) takes more than 30 seconds to light.
  • *** The recycling time is the time needed after the flash fires for the TEST button (READY lamp) to light, as measured under the conditions described above.

Full TTL Compatibility

FUJIFILM X-Pro1 / X-T1 / X-T10 / X-E2 / X-E1 / X-M1 / X-A2 / X-A1 / X100T / X100S / X100 / X30 / X20 / X10 / X-S1
FinePix HS50EXR / HS30EXR / HS33EXR / HS25EXR / HS28EXR / HS20EXR / HS22EXR / S1 / SL300 / SL305 / SL280 / SL260 / SL240

Manual Only Compatibility
HS10

The item has been added to your basket

Continue Shopping
Proceed To Checkout